Hello! Welcome to the official website of Huizhou Guigangxing Furniture Co., Ltd.

环保板式家具
Your current location: Home >> News >> Technical Information

Panel furniture manufacturers: Office furniture can be maintained for at least 20 years

2020-10-31 09:26:53
Times

No matter how good the customized office furniture is, it will deal with dust, dirt, etc., not only jeopardizing its beauty, but also its useful life. Only by careful maintenance can the service life of the customized office furniture be increased, and the office furniture can be kept beautiful and practical for a long time.


Below is a list of the origins of the panel furniture manufacturers, what are the tips for maintaining custom office furniture and the very noteworthy matters, which will help you easily become a home expert.


The cleaning and maintenance of the door frame of the cabinet door is the core area.


Board is the key raw material for customized office furniture. Its pros and cons immediately determine the service life of office furniture.


Always pay attention to keeping the surface clean. Generally, you can use a duster to gently dust off the dust. If there is dirt on the surface, it should be wiped away with sand and wax. If there are preconditions, use cooking oil wax to maintain the veneer on time. Do not wipe the surface with a hard block.


Do not allow organic chemical objects with pH to touch the surface.


1. Avoid sharp objects from hanging objects


Minimize damage or scratches to the surface of the wooden cabinet. If the surface is slightly scratched or scratched, you can use a cloth dipped in a compound of wheat flour and lemonade to apply it, and wax it after drying; if the scratches are deeper, the scratches are less optimistic. , You must blend the same varnish to fill the eyebrows.


2. Clean up key points


Always keep the cabinet doors clean. There should be no dirt or dust in the rails. Avoid hanging objects and sharp objects hitting the rails. The dust on the rails can be removed with a vacuum cleaner or a small brush.


3. Classified and cleared according to door frame materials



板式家具厂家


MDF door frame: the most common door frame material, the board is made of melamine veneer on both sides, which is moisture-proof and waterproof, so it can be gently scrubbed with air-dried cotton towels. Solid wood door panels: solid wood door panels are generally made of some precious mahogany. In the case of cleaning, choose a professional cleaning agent, spray it on a clean cotton cloth, and scrub it on average. Laminated glass door frame: Laminated glass door frame will become rougher and rougher if it is stained with chemical fiber. To maintain their crystal clearness and style, it is better to use car glass water as a cleaning fluid, with newspapers and periodicals to carry out scrubbing. Aluminum alloy profile door frame: car glass water or other detergents are likely to lose the original gloss of the aluminum alloy profile. You can immediately wipe it with an air-dried cotton towel, or you can apply a professional aluminum alloy profile cleaning fluid Let it restore its original appearance. Cortex door frame: the texture of the product is soft to the touch, too hard or sharp objects will cause physical damage to it, so soft towels should be used to scrub as much as possible.


The cleaning and maintenance of hardware accessories, pay attention to the key points to be reasonable


The hardware accessories of the wardrobe include door handles, lock cylinders, door hinges, etc. Although they are small in volume, they are extremely powerful. The cleaning and maintenance of such hardware accessories is also essential.


1. Hardware fittings should be cleaned gently with a dry thin cloth. Do not use acid cleaning liquid or acid-alkaline liquid to clean it, otherwise it will cause the hardware to suffer corrosion.


2. The stainless steel handle and other hardware surfaces can be scrubbed with brightener when the surface is dim, which can increase the brightness.


3. When the anti-theft lock core is not flexible enough to turn, you can scrape a small amount of black powder from the pencil core and blow it into the lock core gently. Do not drip into the grease, it will stick to the dust more casually.


4. Door hinges, hanging pulleys, and universal wheels are likely to reduce their functions due to the adhesion of dust during long-term fitness exercises. One to a few drops of grease can maintain their smoothness in half a year.


Recently Viewed:

未标题-2.pngAdd:

Dahong Science and Technology Park, Zhoukangwei Group, Changbu Village, Xinxu Town, Huiyang District, Huizhou City

未标题-3.pngTel:0752-3368726
未标题-4.pngMobile:13600419948(Mr. Xie)
未标题-5.pngE-mail:tse@worldmarkfurniture.com
未标题-2.pngAdd:

Room 1905, 19th Floor, Nan Fung Centre, 264-298 Castle Peak Road, Tsuen Wan, Hong Kong

未标题-3.pngTel:(852) 2416 3691
未标题-6.pngFax:(853) 3427 3851
未标题-5.pngE-mail:tse@worldmarkfurniture.com 

未标题-1.png

Copyright © Huizhou guigangxing Furniture Co., Ltd All rights reserved Record No粤ICP备2020103507号 Specializing inPanel furniture manufacturers,Furniture processing,Environment friendly panel furniture,Welcome to inquire! Service support:华信环球