Everyone knows that office furniture will appear old during the entire process of application, and will appear fading and embrittlement. In order to better extend the life and reduce costs, we must effectively maintain and maintain the entire application process, and strive to increase The service life of office furniture. Panel furniture manufacturers: How to prevent the fading and embrittlement of office furniture?

Hot temperatures can cause damage to office furniture of different materials, causing office furniture to fade, peel, and even swell and deform. Everyone should take care of office furniture carefully, prevent sun exposure, and prevent pyrogens and air-conditioning vents. In case this cold shrinkage causes the office furniture to deform!

In North China, the moisture content of wood used in office furniture is between 8% and 12%, and the moisture content of plywood and MDF is between 4% and 13%. If you are in a natural environment with excessive dampness and cold or excessive dryness for a long time, it will have a negative impact on office furniture.

Wooden furniture will swell and deform when it returns to moisture, and will cause the structure to loosen after shrinking. The lacquer layer on the surface of wooden office furniture can turn yellow and fade under the sun, speeding up the brittleness and cracking of the bright skin. Therefore, the wooden office furniture is stronger and does not need to be placed on the balcony. The sun should be avoided, the air-conditioning vents should be eliminated, and the central air-conditioning should be turned on to reduce the temperature and humidity of the house. Coating a layer of wax on the drawer cabinets, sliding door edges and bottom sliding rails can avoid the inability to open and close due to swelling. Putting some camphor balls in relatively humid and cold areas can reasonably avoid the biting of small insects.

Obvious light can easily cause fabric sofas to fade and accelerate the embrittlement of fabric curtain furniture. The cloth sofa is placed more strongly in areas that can bypass the Yang!