1. Sticker: use the sticker machine to paste the paper or rubber on the MDF board; (outsourcing processing, the company does not do this process)

2. Cutting: Use computer cutting machine or sliding table saw to cut MDF board or P/B board into the designed size;

3. Forming: Use a multi-blade saw to cut the MDF board or P/B board into small wooden strips;

4. Assembling frame: use an assembling machine to assemble small wooden strips into wooden frames;

5. Put the board: open the MDF base plate of the designed size, put the wooden frame, the small wooden strip, and then put the panel. Repeatedly put in a stack;

6. Gluing: Use a glue machine or cold press to press MDF boards, wooden frames, wooden grids, etc. into hollow boards;

7. Trimming the right angle: use a double-head machine to process the glued and pressure-formed board into a standard size board;

8. Drilling: Use a drilling machine to drill a standard size board;

9. Welting: Use a straight edge machine, a bending machine or a film machine to seal the standard size of the board;

10. Gong machine to hit the road: use the gong machine or road machine to drive the board to the side of the gong or to hit the road;

11. Fuel injection: a small part of the furniture will have fuel injection panels, which should be sprayed with oil and air-dried; (outside processing, this process is not done in the company).

12. Planing board: clean the board and plan to remove the excess glue edge of the board;

13. Assembly: Assemble the relevant hardware accessories to the board;

14. Glass: A small part of the furniture will have glass, (purchase);

15. Finished product packaging: packaging the product into a finished product.

The solid core plate does not need to be squared, assembled, laid out, glued, and trimmed at right angles.